Analogue Intelligent FX-2000 System
Remote Annunciators (Repeaters)
Remote Shared Display
The RAX-LCD Remote Shared Display is a remote annunciator that provides the same functions as the main display on the fire alarm control panel, less the 16 zone LEDs. In addition to operating as a remote annunciator, it can also be used as a driver module for standard LED annunciation or reduced zone annunciation (different from the main panel annunciation), graphic drivers programmed different from the main annunciators, programmable switch modules with a unique configuration and fan damper control also with a unique configuration. Each time a different type of annunciation configuration is needed an additional RAX-LCD is required. The RAX-LCD occupies one display position in the BB-1000 or BB-5000 enclosures.
Main Remote LED Annunciator
The RAM-1032 Main Remote LED Annunciator provides common annunciator functions and 32 points of LED annunciation. Each display point can be identified by the slide-in label that slides in beside the LED. The RAM-1032 is equipped with sealed membrane-like buttons for Common Control functions. The RAM1032 allows for the control switches to be disabled on a per function basis for areas that do not require certain common control functions to be remotely located from the ﬁre alarm control panel. The RAM1032 can be programmed differently than the main panel annunciator or a remote RAX-LCD. All RAM1032 remote annunciators on the system must be programmed the same. The RAM-1032 occupies one display position in the BB-1000 or BB-5000 enclosures.
Adder Remote LED Annunciator
The RAX-1048 Adder Remote LED Annunciator provides an additional 48 points of LED annunciation. The RAX-1048 is an expandable module that connects to the RAM-1032. The RAX-1048 occupies one display position in the BB-1000 or BB-5000 enclosures.
Master Graphic Driver Module
The MGD-32 Master Graphic Driver Module provides common control inputs for the common control switches such as System Reset, Signal Silence, Auxiliary Disconnect, Fire Drill, Lamp Test, Acknowledge and General Alarm. Any or all of these switch inputs can be used. There are supervised outputs for all of the support LEDs and the common control switches. The MGD-32 can also drive up to 32 supervised outputs. These output points are capable of driving LEDs or incandescent lamps. Mounts in a graphic annunciator wallbox or in the BB-5000 enclosures. External power supply required for incandescent lamps and lamp test.
Master Graphic Driver Module
The MGDS-16/16 Master Graphic Driver Module comes with all of the common control switches and LEDs on the front plate. It also contains sixteen configurable LEDs and outputs for sixteen LEDs or incandescent lamps. The MGDS-16/16 has the same functionality as the MGD-32 except it has the common control functions and 16 LEDs on the front panel rather than being outputs for the graphic annunciator. The MGDS-16/16 occupies one display position in the BB-5000 enclosures.
Adder Graphic Driver Module
The AGD-048 Adder Graphic Driver Module can be used with either the MGD-32 or MGDS-16/16 Master Graphic Driver modules, or if located remotely it must be connected and mounted with the RAX-LCD Shared Display. The AGD-048 will support an additional 48 supervised outputs. As with the master modules, the AGD-048 will support both LEDs and incandescent lamps. Mounts in a graphic annunciator wallbox or in the BB-5000 enclosures.
Ein-Azaitoon Co. - ASI